Hyundai Accent: Heated Oxygen Sensor (HO2S). Specifications
Hyundai Accent RB (2010-2018) Service Manual / Engine Control/Fuel System / Engine Control System / Heated Oxygen Sensor (HO2S). Specifications
Specification
HO2S [Bank 1/Sensor 1]
|
Item |
Specification |
|
Heater Resistance (Ω) |
2.4 ~ 4.0 [20°C(68°F)] |
HO2S [Bank 1/Sensor 2]
|
A/F Ratio (λ) |
Output Voltage(V) |
|
RICH |
0.6 ~ 1.0 |
|
LEAN |
0 ~ 0.4 |
|
Item |
Specification |
|
Heater Resistance (Ω) |
Approx. 9.0 [21°C(69.8°F)] |
Heated Oxygen Sensor (HO2S). Description and Operation
Description
Heated Oxygen Sensor (HO2S) consists of zirconium and alumina
and is installed both upstream and downstream of the Manifold Catalytic Converter.
The sensor output voltage varies ...
Heated Oxygen Sensor (HO2S). Troubleshooting
Signal Waveform
...
See also:
Specifications
Specifications
Ignition System
Items
Specification
Ignition coil
Primary resistance
0.7 ± 15 % (Ω)
Secondary r ...
Removal
1.
Disconnect the battery negative cable and wait for at least 3
minutes before beginning work.
2.
Remove the roof trim.
(Refer to ...
Audio Unit. Components and Components Location
Components(PA710S)
Connector A
No
Terminal Description
Condition
Specified Condition
A1
Loudspeaker Rear Left+
...
Hyundai Accent Manuals
© 2011-2024 Copyright www.hamanual.com