Driver Airbag (DAB) |
Never attempt to measure the circuit resistance of the airbag
module (squib) even if you are using the specified tester. If the circuit
resistance is measured with a tester, accidental airbag deployment will
result in serious personal injury.
|
1. |
Check pad cover for dents, cracks or deformities.
|
2. |
Check the airbag module for denting, cracking or deformation.
|
3. |
Check hooks and connectors for damage, terminals for deformities,
and harness for binds.
|
4. |
Check airbag inflator case for dents, cracks or deformities.
|
5. |
Install the airbag module to the steering wheel to check for fit
or alignment with the wheel.
|
1. |
If, as a result of the following checks, even one abnormal point
is discovered, replace the clock spring with a new one.
|
2. |
Check connectors and protective tube for damage, and terminals
for deformities.
|
General Information
General Troubleshooting Information
Before Troubleshooting
1.
Check applicable fuses in the appropriate fuse/relay box.
2.
Check the batte ...
Components and Components Location
Component Location
1. Sunroof
2. Sunroof switch
3. Sunroof motor & controller
...