Hyundai Accent Manuals

Hyundai Accent: Inspection - Front Wheel Speed 
Sensor. Repair procedures - ESC(Electronic Stability Control) System - Brake SystemHyundai Accent: Inspection

1.
Measure the output voltage between the terminal of the wheel speed sensor and the body ground.
•
In order to protect the wheel speed sensor, when measuring output voltage, a 120 Ω resister must be used as shown.

2.
Compare the change of the output voltage of the wheel speed sensor to the normal change of the output voltage as shown below.


V_low: 0.7 V ~ 1.0 V
V_high: 1.4 V ~ 2.0 V
Frequency range: 1 ~ 2,500Hz


Removal
1. Remove the front wheel and tire. Tightening torque: 88.3 ~ 107.9 N.m (9.0 ~ 11.0 kgf.m, 65.1 ~ 79.6 lb-ft) ...

Rear Wheel Speed Sensor. Components and Components Location
Components 1. Rear wheel speed sensor connector 2. Rear wheel speed sensor ...

See also:

Smooth cornering
Avoid braking or gear changing in corners, especially when roads are wet. Ideally, corners should always be taken under gentle acceleration. If you follow these suggestions, tire wear will be he ...

Reassembly
• Thoroughly clean all parts to be assembled. • ...

Water pump. Troubleshooting
Troubleshooting Water Pump Symptoms Possible Causes Remedy Coolant leakage • From the bleed hole ...

Hyundai Accent Manuals


© 2011-2024 Copyright www.hamanual.com