Hyundai Accent: Inspection
| 1. |
Measure the output voltage between the terminal of the wheel speed
sensor and the body ground.
|
| 2. |
Compare the change of the output voltage of the wheel speed sensor
to the normal change of the output voltage as shown below.
|
Removal
1.
Remove the rear wheel and tire.
Tightening torque:
88.3 ~ 107.9 N.m (9.0 ~ 11.0 kgf.m, 65.1 ~ 79.6 lb-ft)
...
Yaw-rate and G Sensor. Description and Operation
Description
When the vehicle is turning with respect to a vertical axis the yaw rate
sensor detects the yaw rate electroniclly by the vibration change of plate fork
inside the yaw rate senso ...
See also:
Front Door. Components and Components
Location
Components
1. Front door trim
2. Front door quadrant inner cover
3. Front door seal
4. Front door panel
5. Front door belt inside weatherstrip
6. Front door bel ...
Repair procedures
Troubleshooting
Starter Circuit
The battery must be in good condition and fully charged.
1.
...
Inspection
1.
Connect the GDS on the Data Link Connector (DLC).
2.
Measure the output voltage of the FTPS.
Specification:
...
Hyundai Accent Manuals
В© 2011-2024 Copyright www.hamanual.com