Hyundai Accent: Inspection
Hyundai Accent RB (2010-2018) Service Manual / Body Electrical System / Horn / Repair procedures / Inspection
Horn Inspection
Test the horn by connecting battery voltage to the 2 terminal and ground
the 1 terminal.
1 : 12V Ground(-)
2 : 12V (+)
Take care not to damage the horn when connecting the battery voltage
to the correct terminal.
|
The horn should make a sound. If the horn fails to make a sound, replace
it.
Horn Relay Inspection
| 1. |
Remove the horn relay (A) from the engine room relay box.
|
| 2. |
There should be continuity between the No.30 and No.87 terminals
when power and ground are connected to the No.85 and No.86 terminals.
|
| 3. |
There should be no continuity between the No.30 and No.87 terminals
when power is disconnected.
|
Removal
1.
Remove the mounting bolt and disconnect the horn connector, then
remove the horn (A).
...
See also:
Interior B ( 4Door )
Seatbelt height adjust upper mounting hole (Ø15)
Seatbelt height adjust lower mounting hole (Ø15)
...
Front Impact Sensor (FIS). Description and Operation
Description
The front impact sensor (FIS) is installed in the front side member. They
are remote sensors that detect acceleration due to a collision at its mounting
location. The primary pur ...
Checking tire inflation pressure
Check your tires once a month or more.
Also, check the tire pressure of the spare tire.
How to check
Use a good quality gage to check tire pressure.You can not tell if your tires
are properly inf ...
Hyundai Accent Manuals
В© 2011-2024 Copyright www.hamanual.com