Hyundai Accent Manuals

Hyundai Accent: Inspection - Front Fog Lamps. Repair procedures - Lighting System - Body Electrical SystemHyundai Accent: Inspection

Hyundai Accent RB (2010-2018) Service Manual / Body Electrical System / Lighting System / Front Fog Lamps. Repair procedures / Inspection

Multifunction Switch (Lighting)
1.
Disconnect the negative (-) battery terminal.
2.
Remove the lighting switch of the multi-function switch. (Refer to the multifunction switch)
3.
With the front fog lamp switch, make sure that continuity exists between the terminals below.
If continuity is not as specified, replace the multi-function switch.
Fog Lamp


Installation
1. Install the fog lamp. 2. Reconnect the fog lamp connector. 3. Connect the negative (-) battery terminal. ...

High Mounted stop lamp. Repair procedures
...

See also:

Inspection
1. Connect the GDS on the Data Link Connector (DLC). 2. Measure the output voltage of the RPS at idle and various engine speed. ...

Front Impact Sensor (FIS). Description and Operation
Description The front impact sensor (FIS) is installed in the front side member. They are remote sensors that detect acceleration due to a collision at its mounting location. The primary pur ...

Cleaning
1. Do not immerse parts in cleaning solvent. Immersing the yoke assembly and/or armature will damage the insulation wipe these parts with a cloth only. ...

Hyundai Accent Manuals


В© 2011-2025 Copyright www.hamanual.com