Hyundai Accent: Inspection
| 1. |
Immerse the thermostat in water and gradually heat
the water.
|
| 2. |
Check the valve opening temperature.
If the valve opening temperature is not as specified,
replace the thermostat.
|
| 3. |
Check the valve lift.
If the valve lift is not as specified, replace the
thermostat.
|
Removal
Disassembly of the thermostat would have an adverse
effect, causing a lowering of cooling efficiency.
1.
...
Installation
1.
Place the thermostat in the block.
Install the thermostat (B) with the jiggle valve
upward.
2.
Install the water inlet fitting ( ...
See also:
Camshaft Position Sensor
(CMPS). Troubleshooting
Wave Form
...
High beam operation
To turn on the high beam headlights, push the lever away from you. Pull it back
for low beams.
The high beam indicator will light when the headlight high beams are switched
on.
To prevent the ...
Installation
1.
Installation is reverse of removal.
Accelerator pedal
module installation nut:
12.7 ~ 15.7 N.m (1.3 ~ 1.6 kgf.m, 9.4 ~ 11.6
...
Hyundai Accent Manuals
© 2011-2024 Copyright www.hamanual.com