1. |
Check each part for cracks, damage or wear, and replace
the coolant pump assembly if necessary.
|
2. |
Check the bearing for damage, abnormal noise and
sluggish rotation, and replace the coolant pump assembly if necessary.
|
3. |
Check for coolant leakage. If coolant leaks from
hole, the seal is defective. Replace the coolant pump assembly and gasket.
|
Inspection
Connecting Rod And Crankshaft
1.
Check the connecting rod end play.
Using feeler gauge, measure the end play while moving
the connecting rod back and f ...
Servicing The Electrical System
1.
Prior to servicing the electrical system, be sure
to turn off the ignition switch and disconnect the battery ground cable.
...
Inspection
1.
Insert a thin stick (A) into the PCV valve (B) from
the threaded side to check that the plunger movement.
...