1. |
Turn the ignition switch OFF.
|
2. |
Remove the ECTS (Refer to "Removal").
|
3. |
After immersing the thermistor of the sensor into
engine coolant, measure resistance between the ECTS terminals 3 and
4.
|
4. |
Check that the resistance is within the specification.
|
Oil And Filter Replacement
•
Prolonged and repeated contact with mineral
oil will result in the removal of natural fats ...
Intake Air Temperature
Sensor (IATS). Specifications
Specification
Temperature
Resistance (kΩ)
°C
°F
-40
-40
40.93 ~ 48.35
-20
...
Inspection
1.
Turn ignition switch OFF.
2.
Disconnect the oil temperature sensor connector.
3.
Measure resistance between ...