1. |
Turn the ignition switch OFF.
|
2. |
Disconnect the HO2S connector.
|
3. |
Measure resistance between the HO2S terminals 4 and
5 [B1/S1].
|
4. |
Measure resistance between the HO2S terminals 3 and
4 [B1/S2].
|
5. |
Check that the resistance is within the specification.
|
Troubleshooting
Troubleshooting
Symptom
Suspect Area
Remedy
Water leaks from sunroof
Dirt accumulated in drain tube
Clear dirt inside of drain
...
Inspection
1.
Check the hub for cracks and the splines for wear.
2.
Check the brake disc for scoring and damage.
3.
C ...
Front Seat. Repair procedures
Replaccement
Seat Assembly Replacement
1.
After loosening the seat assembly mounting bolts, remove the seat
assembly (A).
Tightening torque ...