Hyundai Accent: Inspection

Hyundai Accent RB (2010-2018) Service Manual / Engine Control/Fuel System / Engine Control System / Injector. Repair procedures / Inspection

1.	Turn the ignition switch OFF.

2.	Disconnect the injector connector.

3.	Measure resistance between the injector terminals 1 and 2.

4.

Check that the resistance is within the specification.

Specification: Refer to “Specification”

Injector. Repair procedures

...

Removal

In case of removing the high pressure fuel pump, high pressure fuel pipe, delivery pipe, and injector, there may be injury ...

See also:

Inspection
TCM Problem Inspection Procedure 1. TEST TCM GROUND CIRCUIT: Measure resistance between TCM and chassis ground using the backside of TCM harness connector as TCM side ...

Adjustment
Clutch Release Cylinder Air Bleeding Procedure Use the specified fluid. Avoid mixing different brands of fluid ...

Jack and tools
The jack, jack handle, and wheel lug nut wrench are stored in the luggage compartment. Pull up the luggage box cover to reach this equipment. (1) Jack (2) Jack handle (3) Wheel lug nut wrench ...

Hyundai Accent Manuals

© 2011-2024 Copyright www.hamanual.com