Hyundai Accent: Inspection
| 1. |
Inspect diaphragm spring wear which is in contact
with a concentric slave cylinder bearing.
|
| 2. |
Check the clutch cover and disc surface for wear
or cracks.
|
| 3. |
Check the clutch disc lining for slipping or oil
marks.
|
| 4. |
Measure the depth from a clutch lining surface to
a rivet. If the measured value is less than the specification below,
replace it.
|
Removal
1.
Remove the transaxle assembly. (Refer to "Manual
transaxle system" in MT group)
2.
Remove the clutch cover bolts. Be careful ...
Installation
If reinstalling used cover, the cover should be installed
with its clutch disc as a set.
1.
Re ...
See also:
Inspection
1.
Insert a thin stick (A) into the PCV valve (B) from
the threaded side to check that the plunger movement.
...
Installation
1.
Connect the horn connector, then reassemble the horn.
...
Gauges
Speedometer
The speedometer indicates the speed of the vehicle.
The speedometer is calibrated in miles per hour and/or kilometers per hour.
Tachometer
The tachometer indicates the approximate ...
Hyundai Accent Manuals
© 2011-2024 Copyright www.hamanual.com