1. |
Check the components for damage or deformation.
|
2. |
Compress and extend the piston rod (A) and check that there is
no abnormal resistance or unusual sound during operation.
|
3. |
If non smooth working or unusual sound during operation, must
be exchange the shock absorber.
|
1. |
Fully extend the piston rod.
|
2. |
Drill a hole on the (A) section to remove gas from the cylinder.
|
Overdrive Clutch Control Solenoid Valve(OD/C_VFS). Schematic Diagrams
Circuit Diagram
...
Heated Oxygen Sensor (HO2S). Troubleshooting
Signal Waveform
...
Rear Seat. Repair procedures
Replacement
Seat Assembly Replacement
1.
After loosening the mounting bolt, then remove the rear seat cushion
(A).
Tightening torque :
...