Pressure Side Impact Sensor |
1. |
Install the new pressure side impact sensor with the screws (B)
then connect the pressure side impact sensor connector (A).
|
2. |
Install the front door trim.
(Refer to the Body group - "Front door")
|
3. |
Reconnect the battery negative cable.
|
4. |
After installing the pressure side impact sensor, confirm proper
system operation:
|
|
1. |
Install the new side impact sensor with the bolt (B) then connect
the side impact sensor connector (A).
|
2. |
Install the center pillar trim.
(Refer to the Body group - "Interior tirm")
|
3. |
Install the door scuff trim.
(Refer to the Body group - "Interior tirm")
|
4. |
Insert the seat belt to the anchor pretensioner (A).
|
5. |
Reconnect the battery negative cable.
|
6. |
After installing the Side Impact Sensor, confirm proper system
operation:
|
Removal
1.
Turn the ignition switch OFF and disconnect the battery
negative (-) cable.
2.
Disconnect the variable intake solenoid valve connector
...
Power Window Switch. Repair procedures
Inspection
Power Window Main Switch Inspection
1.
Disconnect the negative (-) battery terminal.
2.
Remove the front door trim panel.
...
Installation
1.
Connect the horn connector, then reassemble the horn.
...