Be sure to install the harness wires not to be pinched or interfered
with other parts.
|
|
1. |
Remove the ignition key from the vehicle.
|
2. |
Disconnect the battery negative cable and wait for at least three
minutes.
|
3. |
Install the new seat back assembly.
(Refer to the Body group - "Seat")
|
4. |
Install the front seat assembly.
(Refer to the Body group - "Seat")
|
5. |
Recline and slide the front seat forward fully, make sure the
harness wires are not pinched of interfering with other parts.
|
6. |
Reconnect the battery negative cable.
|
7. |
After installing the side airbag (SAB), confirm proper system
operation:
|
Variable Intake Solenoid
(VIS) Valve. Schematic Diagrams
Circuit Diagram
(M/T)
(A/T)
...
Cylinder Block. Components and
Components Location
Components
1. Cylinder block
2. Ladder frame
3. Crankshaft
4. Crankshaft upper bearing
5. Crankshaft lower bearing
6. Thrust bearing
7. Main bearing cap
...
Battery Sensor. Description and Operation
Description
Vehicles have many control units that use more electricity.
These units control their own system based on information from diverse sensors.
It is important to have a stable power ...