Rear Disc Brake Type |
1. |
Install the parking brake cable.
|
2. |
Install the parking brake cable (A), and then install the clip
(B).
|
3. |
Install the rear tire and wheel.
|
4. |
Install the parking brake lever assembly.
|
5. |
Apply a coating of the specified grease to each sliding parts
(A) of the ratchet plate or the ratchet pawl.
|
6. |
Install the parking brake cable adjuster, then adjust the parking
brake lever stroke by turning adjusting nut (A).
|
7. |
Release the parking brake lever fully, and check that parking
brakes do not drag when the rear wheels are turned. Readjust if necessary.
|
8. |
Make sure that the parking brakes are fully applied when the parking
brake lever is pulled up fully.
|
9. |
Reconnect the connector (A) of parking brake switch.
|
10. |
Install the floor console rear mounting bracket.
|
11. |
Install the floor console. (Refer to Body group - "Floor console")
|
Rear Drum Brake Type |
1. |
Install the parking brake cable.
|
2. |
Install the parking brake cable (A), and then install the clip
(B).
|
3. |
Remove the brake shoe. (Refer to the rear drum brake)
|
4. |
Install the rear tire and wheel.
|
5. |
Install the parking brake lever assembly.
|
6. |
Apply a coating of the specified grease to each sliding parts
(A) of the ratchet plate or the ratchet pawl.
|
7. |
Install the parking brake cable adjuster, then adjust the parking
brake lever stroke by turning adjusting nut (A).
|
8. |
Release the parking brake lever fully, and check that parking
brakes do not drag when the rear wheels are turned. Readjust if necessary.
|
9. |
Make sure that the parking brakes are fully applied when the parking
brake lever is pulled up fully.
|
10. |
Reconnect the connector (A) of parking brake switch.
|
11. |
Install the floor console rear mounting bracket.
|
12. |
Install the floor console. (Refer to Body group - "Floor console")
|
Windshield Glass. Repair procedures
Replacement
Removal
•
Put on gloves to protect your hands.
...
Circuit Diagram
...
Installation
1.
Install the roof antenna and connect the cable.
2.
Install the roof trim.
...