Hyundai Accent: Installation

Hyundai Accent RB (2010-2018) Service Manual / Body Electrical System / Indicators And Gauges / Instrument Cluster. Repair procedures / Installation

1.	Connect the cluster connector.

2.	Install the cluster assembly.

3.	Connect the trip switch connector.

4.	Install the center fascia panel.

Removal

1. Disconnect the negative (-) battery terminal. 2. Remove the cluster fascia panel (A) after disconnecting the trip switch connector(B). ...

Troubleshooting

Troubleshooting Symptom Possible cause Remedy Speedometer does not operate Cluster fuse (10A) is blown Check for short and ...

See also:

Anchor Pretensioner (APT). Description and Operation
Description Front anchor pretensioner operates as well as Belt Pretensioner at the same time If it gets into its deploy condition after a collision. It is located at near anchor on driver se ...

Components and Components Location
Component Location 1. Rear glass defogger relay (Interior junction box) 2. Rear glass defogger switch (A/C controller) 3. Rear glass defogger ...

Camshaft Position Sensor (CMPS). Troubleshooting
Wave Form ...

Hyundai Accent Manuals

© 2011-2025 Copyright www.hamanual.com