Hyundai Accent Manuals

Hyundai Accent: Installation - Power Door Lock Switch. Repair procedures - Power Door Locks - Body Electrical SystemHyundai Accent: Installation

Hyundai Accent RB (2010-2018) Service Manual / Body Electrical System / Power Door Locks / Power Door Lock Switch. Repair procedures / Installation

1.
Install the power window switch module.
2.
Install the door trim panel after reconnecting the relevant connectors
-
Make sure that the power window switch module connectors are plugged properly.
-
Check that the power window switch and door lock switch operate normally.

Removal
1. Disconnect the negative(-) battery terminal. 2. Remove the front door trim panel. (Refer to the BD group - "Front door") ...

Power Door Mirrors
...

See also:

Installation
Sensor Fit • Handle the sensor with care. • ...

Specifications
Specification Item Bulb Watt (W) Bulb Type Front Head lamp (High) 60 HB2 LL Head lamp (Low) ...

BCM connectors
Pin Connector A Connector B 1 Battery Room Lamp Output 2 Local ignition1 input in BCM ...

Hyundai Accent Manuals


© 2011-2024 Copyright www.hamanual.com