1. |
Install the wiper motor.
|
2. |
Install the crank arm.
|
3. |
Install the lower and upper linkage to the wiper motor crank arm.
|
4. |
Install the wiper motor and linkage assembly and then connect
the wiper motor connector.
|
5. |
Install the cowl top cover.
|
6. |
Install the windshield wiper arm and blade.
|
7. |
Install the wiper arm and blade to the auto stop position.
A : Glass marking point
|
8. |
Set the cowl top cover on the specified spray position.
|
Inspection
Throttle Position Sensor (TPS)
1.
Connect the GDS on the Data Link Connector (DLC).
2.
Start the engine and measure the output voltage of
...
Installation
1.
Install the high mounted stop lamp.
2.
Install the trunk trim.
...
Schematic Diagrams
Schematic Diagram
...