Hyundai Accent: Installation
| 1. |
Install the overhead console lamp after connecting the sunroof
switch connector and lamp connector.
|
| 2. |
Install the lens after tightening 2 screws.
|
Removal
1.
Disconnect the negative (-) battery terminal.
2.
Loosen 2 screws holding the overhead console (A).
3.
...
See also:
Removal
1.
Turn the ignition switch OFF and disconnect the battery
negative (-) cable.
2.
Disconnect the engine coolant temperature sensor
con ...
Vehicle weight
This section will guide you in the proper loading of your vehicle, to keep your
loaded vehicle weight within its design rating capability. Properly loading your
vehicle will provide maximum return ...
Installation
1.
Installation is reverse of removal.
PCV Valve installation:
7.8 ~ 11.8 N.m (0.8 ~ 1.2 kgf.m, 5.8 ~ 8.7
lb-ft)
...
Hyundai Accent Manuals
В© 2011-2024 Copyright www.hamanual.com