Hyundai Accent: Installation

Removal

1. Disconnect the negative (-) battery terminal. 2. Disconnect the fog lamp connector (A). 3. Remove t ...

Inspection

Multifunction Switch (Lighting) 1. Disconnect the negative (-) battery terminal. 2. Remove the lighting switch of the multi-function switc ...

See also:

Ignition switch position
LOCK The steering wheel locks to protect against theft (if equipped). The ignition key can be removed only in the LOCK position. When turning the ignition switch to the LOCK position, push the k ...

Removal
1. Turn the ignition switch OFF and disconnect the battery negative (-) cable. 2. Remove the resonator and the air intake hose (Refer ...

Output Speed Sensor. Troubleshooting
Signal Waveform Fig 1) Input/Output speed sensor at low speed Fig 2) Input/Output speed sensor at high speed ...