Hyundai Accent Manuals

Hyundai Accent: Installation - Thermostat. Repair procedures - Cooling System - Engine Mechanical SystemHyundai Accent: Installation

Hyundai Accent RB (2010-2018) Service Manual / Engine Mechanical System / Cooling System / Thermostat. Repair procedures / Installation

1.
Place the thermostat in the block.
Install the thermostat (B) with the jiggle valve upward.
2.
Install the water inlet fitting (A).
Tightening torque :
18.6 ~ 23.5N.m (1.9 ~ 2.4kgf.m, 13.7 ~ 17.4lb-ft)

3.
Fill with engine coolant.
4.
Start engine and check for leaks.

Inspection
1. Immerse the thermostat in water and gradually heat the water. 2. Check the valve opening temperature. ...

Thermostat. Troubleshooting
Troubleshooting Symptoms Possible Causes Remedy Coolant leakage • From the thermostat gasket ...

See also:

[Auto Down]
...

Lift And Support Points
When heavy rear components such as suspension, fuel tank, spare tire, tailgate and trunk lid are to be removed, place additiona ...

Indicator symbols on the instrument cluster
* For more detailed explanations, refer to “Instrument cluster” in section 4. ...

Hyundai Accent Manuals


© 2011-2024 Copyright www.hamanual.com