Hyundai Accent Manuals

Hyundai Accent: Installation - CVVT Oil Control Valve (OCV). Repair procedures - Engine Control System - Engine Control/Fuel SystemHyundai Accent: Installation

Hyundai Accent RB (2010-2018) Service Manual / Engine Control/Fuel System / Engine Control System / CVVT Oil Control Valve (OCV). Repair procedures / Installation

•
Install the component with the specified torques.
•
Note that internal damage may occur when the component is dropped. If the component has been dropped, inspect before installing.
•
Apply engine oil to the valve O-ring.
1.
Installation is reverse of removal.
CVVT oil control valve installation bolt:
9.8 ~ 11.8 N.m (1.0 ~ 1.2 kgf.m, 7.2 ~ 8.7 lb-ft)

Removal
1. Turn the ignition switch OFF and disconnect the battery negative (-) cable. 2. Disconnect the CVVT oil control valve connector (A). ...

Variable Intake Solenoid (VIS) Valve. Description and Operation
Description Variable Intake manifold Solenoid (VIS) valve is installed on the intake manifold. The VIS valve controls the vacuum modulator which activates a valve in the intake manifold. The ...

See also:

Instrument panel overview
1. Driver’s front air bag* 2. Horn 3. Light control/Turn signals 4. Instrument cluster 5. Wiper/Washer 6. Ignition switch 7. Digital clock and audio* 8. Steering wheel 9. Steering wheel au ...

Precautions For Catalytic Converter
If a large amount of unburned gasoline flows into the converter, it may overheat and create a fire hazard. To prevent this ...

Installation
• Do not spill brake fluid on the vehicle: it may damage the paint; if brake fluid does conta ...

Hyundai Accent Manuals


© 2011-2024 Copyright www.hamanual.com