1. |
Remove the ignition key from the vehicle.
|
2. |
Disconnect the battery negative cable and wait for at least three
minutes.
|
3. |
Install the seat belt pretensioner with mounting bolts (B, C).
|
4. |
Connect the seat belt pretensioner (BPT) connector (A).
|
5. |
Install the upper anchor bolts.
|
6. |
Install the following parts.
(Refer to the Body group - "Interior trim")
|
7. |
Install the lower anchor bolts.
|
8. |
Reconnect the battery negative cable.
|
9. |
After installing the seat belt pretensioner, confirm proper system
operation:
|
Installation
1.
Installation is reverse of removal.
PCV Valve installation:
7.8 ~ 11.8 N.m (0.8 ~ 1.2 kgf.m, 5.8 ~ 8.7
lb-ft)
...
26 Brake Control Solenoid Valve(26/B_VFS). Specifications
Specifications
Direct control VFS[26/B]
▷ Control type : Normal low type
Control Pressure kpa (kgf/cm², psi)
9.81 ~ 500.14
(0.1 ~ 5.5, 1.42 ~ 7.82)
...
Check battery and cables
Winter puts additional burdens on the battery system. Visually inspect the battery
and cables as described in section 7. The level of charge in your battery can be
checked by an authorized HYUNDAI ...