Hyundai Accent: Instrument Cluster. Description
and OperationDescription
| Function |
| - |
This function dose not operate if the vehicle equipped BCM.
|
| - |
With the tail lamp switched ON, if the ignition Is switched OFF
and the driver’s door opened, the tail lamp warning buzzer should be
automatically turned ON.
|
| - |
The tail lamp warning buzzer built in the instrument cluster.
|
Replacement
1.
Loosen the wheel nuts slightly.
Raise the vehicle, and make sure it is securely supported.
2.
Remove the front wheel and tire (A) fro ...
Repair procedures
On-vehicle Inpection
•
Check that the battery cables are connected
to the correct terminals. ...
Installation
1.
Remove the ignition key from the vehicle.
2.
Disconnect the battery negative cable and wait for at least three
minutes before beginning ...