Hyundai Accent: Intake And Exhaust System
Oil Pressure Switch. Repair
procedures
Intake Manifold. Components
and Components LocationRemovable towing hook
1. Open the trunk lid/tailgate, and remove the towing hook from the tool case.
2. Remove the hole cover pressing the lower part of the cover on the bumper.
3. Install the towing hook by turning it ...
Rail Pressure Sensor (RPS). Troubleshooting
Signal Waveform
...
Removal
1.
Disconnect the battery negative cable and wait for at least 3
minutes before beginning work.
2.
Remove the roof trim.
(Refer to ...