Hyundai Accent: Knock Sensor (KS). Repair procedures

Knock Sensor (KS). Schematic Diagrams

Circuit Diagram (M/T) (A/T) ...

Removal

1. Turn the ignition switch OFF and disconnect the battery negative (-) cable. 2. Remove the intake manifold (Refer to “Intake And E ...

See also:

Specifications
Specifications Ignition System Items Specification Ignition coil Primary resistance 0.7 ± 15 % (Ω) Secondary r ...

Thermostat. Components and Components Location
Components 1. Water inlet fitting 2. Thermostat 3. Heater pipe 4. Bypass hose 5. Water temp control assembly 6. Water temperature sensor 7. Gasket ...

Checking the engine oil level
1. Be sure the vehicle is on level ground. 2. Start the engine and allow it to reach normal operating temperature. 3. Turn the engine off and wait for a few minutes (about 5 minutes) for the oil ...