When heavy rear components such as suspension, fuel
tank, spare tire, tailgate and trunk lid are to be removed, place additional
weight in the luggage area before hoisting. When substantial weight
is removed from the rear of the vehicle, the center of gravity may change
and can cause the vehicle to tip forward on the hoist.
|
|
1. |
Place the lift blocks under the support points as
shown in the illustration.
|
2. |
Raise the hoist a few inches (centimeters) and rock
the vehicle to be sure it is firmly supported.
|
3. |
Raise the hoist to full height to inspect the lift
points for secure support.
|
Special Service Tools
Special Service Tools
Tool (Number and Name)
Illustration
Use
09581-11000
Piston expander
Spreading the front disc ...
Console. Repair procedures
Replacement
Floor Console Replacement
[ M/T ]
•
When prying with a flat-tip screw ...
Repair procedures
Inspection
1.
After disconnecting the vapor hose from the PCV valve,
remove the PCV valve.
2.
Reconnect the PCV valve to the vapor hose.
...