Hyundai Accent: Manual Transaxle Control System

Installation

1. Installation is the reverse of removal. • ...

Shift Lever. Components and Components Location

Components 1. Shift lever knob & boot assembly 2. Shift lever assembly 3. Shift cable assembly 4. Select cable assembly 5. Retainer ...

See also:

Measurement Method
Projected Dimensions 1. These are the dimensions measured when the measurement points are projected into the reference plane, and are the reference dimensions ...

Removal
1. Disconnect the negative (-) battery terminal. 2. Remove the cluster fascia panel (A) after disconnecting the trip switch connector(B). ...

Removal
1. Turn the ignition switch OFF and disconnect the battery negative (-) cable. 2. Remove the resonator and the air intake hose (Refer ...