1. |
Basically, all measurements in this manual are taken
with a tracking gauge.
|
2. |
When a measuring tape is used, check to be sure there
is no elongation, twisting or bending.
|
3. |
For measuring dimensions, both projected dimensions
and actual - measurement dimensions are used in this manual.
|
Teaching Procedures
1.
Key Teaching Procedure
Key teaching must be done after replacing a defective PCM (ECM)
or when providing additional keys to the vehicle owner.
Th ...
Removal
Replacing an on/off solenoid valve (SS-A, SS-B) does not require
additional hydraulic pressure adjustment; however, the hydraul ...