Hyundai Accent: Passenger and Rear Power Window Switch

[Auto Down]

...

Power Window Switch. Repair procedures

Inspection Power Window Main Switch Inspection 1. Disconnect the negative (-) battery terminal. 2. Remove the front door trim panel. ...

See also:

Output Speed Sensor. Troubleshooting
Signal Waveform Fig 1) Input/Output speed sensor at low speed Fig 2) Input/Output speed sensor at high speed ...

Installation
When replacing the ECM, the vehicle equipped with the immobilizer must be performed procedure as below. [In the ...

Heating and air conditioning
1. Start the engine. 2. Set the mode to the desired position. For improving the effectiveness of heating and cooling; - Heating: - Cooling: 3. Set the temperature control to the desired positio ...