Hyundai Accent: Removal
| 1. |
Disconnect the battery negative cable and wait for at least three
minutes before beginning work.
|
| 2. |
Turn the steering wheel so that the front wheels can face straight
ahead.
|
| 3. |
Remove the driver airbag module mounting bolts (2EA).
|
| 4. |
Remove the wiring fixing clip (C), and then release the connector
locking pin to disconnect the driver airbag module connector (B).
|
| 5. |
Remove the steering wheel and steering wheel column shroud.
(Refer to the Steering System group - "Steering Column and Shaft")
|
| 6. |
Disconnect the clock spring connector, then remove the clock spring.
|
Inspection
Driver Airbag (DAB)
If any improper parts are found during the following inspection, replace
the airbag module with a new one.
...
See also:
Components and Components Location
Component Location
1. Trunk lid actuator & switch
2. Rear door switch
3. Body control module
4. Key warning switch
5. Front door switch
6. Front door loc ...
Oil Pump. Components and Components
Location
Components
1. Timing chain cover
2. Inner roter
3. Outer roter
4. Pump cover
5. Gasket
6. Oil screen
7. Oil pan
8. Drain plug gasket
9. Oil drain pl ...
Manual Transaxle. Components
and Components Location
Components
1. Transaxle support bracket
2. Control shaft complete
3. Back up lamp switch
4. Speedmeter
...
Hyundai Accent Manuals
В© 2011-2024 Copyright www.hamanual.com