Hyundai Accent: Removal
The side airbag cannot be disassembled from the seat back assembly,
so replace assembly when replacing the side airbag.
|
| 1. |
Disconnect the battery negative cable and wait for at least 3
minutes before beginning work.
|
| 2. |
Remove the front seat assembly.
(Refer to the Body group - "Seat")
|
| 3. |
Remove the seat back assembly.
(Refer to the Body group - "Seat")
|
Installation
Be sure to install the harness wires not to be pinched or interfered
with other parts.
...
See also:
Removal
1.
Remove the mounting bolt and disconnect the horn connector, then
remove the horn (A).
...
Removal
Engine removal is not required for this procedure.
•
Use fender covers to avoid damaging painted ...
Transmitter Code Registration (Using GDS)
1.
Connect the DLC cable of GDS to the data link connector (16 pins)
in driver side crash pad lower panel, turn the power on GDS.
2.
...
Hyundai Accent Manuals
В© 2011-2024 Copyright www.hamanual.com