Hyundai Accent: Removal

Hyundai Accent RB (2010-2018) Service Manual / Restraint (Advanced) / Seat Belt Pretensioner / Seat Belt Pretensioner (BPT). Repair procedures / Removal

1.	Disconnect the battery negative cable, and wait for at least three minutes before beginning work.

2.	Remove the seat belt after pushing the lock pin (A).

3.

Remove the following parts.

(Refer to the Body group - "Interior trim")

A.	Door scuff trim

B.	Center pillar trim

4.	Remove the upper anchor bolt.

5.	Disconnect the seat belt pretensioner connector (A).

6.	Loosen the seat belt pretensioner mounting bolts (B,C) and remove the seat belt pretensioner.

Seat Belt Pretensioner (BPT). Repair procedures

...

Installation

1. Remove the ignition key from the vehicle. 2. Disconnect the battery negative cable and wait for at least three minutes. ...

See also:

Special Service Tools
Special Service Tools Item Illustration Application Fuel Pressure Gauge (09353-24100) Measuring the fuel line press ...

Crankshaft Position Sensor (CKPS). Description and Operation
Description Crankshaft Position Sensor (CKPS) detects the crankshaft position and is one of the most important sensors of the engine control system. If there is no CKPS signal input, the eng ...

Removal and Installation
1. Disconnect the battery negative terminal. Tightening torque (-) terminal : 4.0 ~ 6.0N.m (0.4 ~ 0.6kgf.m, 3.0 ~ 4.4l ...

Hyundai Accent Manuals

© 2011-2024 Copyright www.hamanual.com