1. |
Disconnect the battery negative cable, and wait for at least three
minutes before beginning work.
|
2. |
Remove the seat belt after pushing the lock pin (A).
|
3. |
Remove the following parts. (Refer to the Body group-Interior
trim)
|
4. |
Disconnect the anchor pretensioner connector (A).
|
5. |
Loosen the anchor pretensioner mounting bolt (B) and remove the
anchor pretensioner.
|
Sub Frame. Repair procedures
Replacement
1.
Remove the front wheel & tire.
Tightening torque :
88.3 ~ 107.9N.m(9.0 ~ 11.0kgf.m, 65.1 ~ 79.6lb-ft)
...
Side Body A ( 4Door )
Front side member tooling hole (Ø12)
Fender apron upper reinforcement
tooling hole (Ø7)
...
Alternator. Components and Components
Location
Components
1. Nut
2. Pulley
3. Spacer
4. Front bracket
5. Front bearing
6. Stator
7. Rotor
8. Rear bearing
9. Rear bracket
10. Brush holder assem ...