1. |
Disconnect the brake fluid level switch connector, and remove
the reservoir cap.
|
2. |
Remove the brake fluid from the master cylinder reservoir with
a syringe.
|
3. |
Remove the wheel & tire.
|
4. |
Loosening the tube flare nut (B).
[Front]
[Rear]
|
5. |
Disconnect the brake tube by remove the brake hose clip (A).
|
6. |
Disconnect the brake hose from the brake caliper by loosening
the bolt (A).
[Front disc brake]
[Rear Disc brake]
|
Removable towing hook
1. Open the trunk lid/tailgate, and remove the towing hook from the tool case.
2. Remove the hole cover pressing the lower part of the cover on the bumper.
3. Install the towing hook by turning it ...
Cleaning
1.
Make sure the ignition switch and all accessories
are in the OFF position.
2.
Disconnect the battery cables (negative first).
...
Installation
Door Mirror Turn Signal Lamp
1.
Install the door mirror turn signal lamp to the door mirror.
2.
Install the door mirror.
...