1. |
Turn ignition switch OFF.
|
2. |
Remove the crash pad lower panel.
(Refer to the Body group - "Crash pad")
|
3. |
Disconnect the stop lamp switch connector (A).
|
4. |
Remove the shift lock cable (B) after removing the snap pin and
the clip.
|
5. |
Remove the BCM.
(Refer to the Body Electrical group - "BCM".)
|
6. |
Remove the mounting bracket bolts (B).
|
7. |
Remove the snap pin (A) and clevis pin (B).
|
8. |
Remove the brake pedal member assembly mounting nuts (A) and then
remove the brake pedal assembly.
|
Specifications
Description
Specifications
Limit
General
Type
In-line, DOHC
Number of cylinders
...
Description and Operation
Warning Lamp Activation
Warning Lamp Behavior after Ignition
On
As soon as the operating voltage is applied to the SRSCM ignition input,
the SRSCM activates the warning lamp fo ...
SRS Control Module (SRSCM). Description and
Operation
Description
The primary purpose of the SRSCM (Supplemental Restraints System Control
Module) is to discriminate between an event that warrants restraint system deployment
and an event that d ...