Hyundai Accent Manuals

Hyundai Accent: Removal - Rear Disc Brake. Repair procedures - Brake System - Brake SystemHyundai Accent: Removal

1.
Remove the rear wheel & tire.

Tightening torque:
88.3 ~ 107.9 N.m (9.0 ~ 11.0 kgf.m, 65.1 ~ 79.6 lb-ft)

2.
Remove the parking brake cable (A), after removing the clip (B).

Parking brake lever in the car must be in fully loosened position.
3.
Remove the hose eyebolt (B).

Tightening torque:
Brake hose to caliper:
24.5 ~ 29.4 N.m (2.5 ~ 3.0 kgf.m, 18.1 ~ 21.7 lb-ft)

4.
Loosen the caliper mounting bolts (C), then remove the rear caliper assembly (A).

Tightening torque:
Caliper assembly to carrier:
49.0 ~ 58.8 N.m (5.0 ~ 6.0 kgf.m, 36.2 ~ 43.4 lb-ft)

5.
Remove the rear brake disc by loosening the screws (A).


Rear Disc Brake. Repair procedures
...

Replacement
Rear Brake Pads 1. Loosen the guide rod bolt (B) and then remove the rear caliper body (A). Tightening torque: 21.6 ~ 31 ...

See also:

TPMS Receiver. Repair procedures
Replacement 1. Disconnect the battery negative cable from the battery. 2. Remove faulty part and fit bracket assembly to new part. ...

Injector. Troubleshooting
Signal Waveform ...

Front Wheel Alignment
When using a commercially available computerized wheel alignment equipment to inspect the front wheel alignment, always positio ...

Hyundai Accent Manuals


В© 2011-2024 Copyright www.hamanual.com