|
1. |
Release the parking brake.
|
2. |
Remove the rear wheel & tire.
|
3. |
Remove the rear brake drum (A).
|
4. |
Remove the upper return spring (A).
|
5. |
Remove the lower return spring (B).
|
6. |
Remove the shoe hold springs (A) and shoe hold pins (B) and then
remove brake shoe (C). Make sure not to damage the dust cover on the
wheel cylinder.
|
7. |
Remove the parking brake cable (A) and then remove brake shoe
(B).
|
8. |
Disconnect brake tubes (A) from the wheel cylinder (B).
|
9. |
Remove the bolt (C) and the wheel cylinder (B) from the backing
plate (D).
|
26 Brake Control Solenoid Valve(26/B_VFS). Description and Operation
Description
26 brake control solenoid valve(26/B_VFS) is attached to the valve body.
This variable force solenoid valve directly controls the hydraulic pressure
inside the 26 brake.
...
Jump starting
Jump starting can be dangerous if done incorrectly. Therefore, to avoid harm
to yourself or damage to your vehicle or battery, follow the jump starting procedures.
If in doubt, we strongly recomme ...
Camshaft Position Sensor
(CMPS). Troubleshooting
Wave Form
...