Hyundai Accent: Removal

Inspection

Horn Inspection Test the horn by connecting battery voltage to the 2 terminal and ground the 1 terminal. 1 : 12V Ground(-) 2 : 12V (+) ...

Installation

1. Connect the horn connector, then reassemble the horn. ...

See also:

License plate light bulb replacement
4 Door 1. Remove the trunk trim. 2. Remove the socket by turning it counterclockwise. 3. Remove the bulb by pulling it straight out. 4. Install a new bulb. 5. Install the socket by turning it c ...

Installation
1. Remove the ignition key from the vehicle. 2. Disconnect the battery negative cable and wait for at least three minutes. ...

Replacement
1. Turn ignition switch OFF. 2. Disconnect the negative (-) battery cable. 3. Disconnect the TCM connector (A ...