1. |
Disconnect the negative (-) battery terminal.
|
2. |
Remove the cluster fascia panel (A) after disconnecting the trip
switch connector(B).
|
3. |
Remove the cluster fascia (A) from the crash pad after removing
4 screws.
|
4. |
Disconnect the cluster fascia connecters(A) and then remove the
cluster.
|
Passenger Airbag (PAB) Module. Description
and Operation
Description
The passenger airbag (PAB) is installed inside the crash pad and protects
the front passenger in the event of a frontal crash. The SRSCM determines if
and when to deploy the PAB. ...
Removal
1.
Disconnect the negative (-) battery terminal.
2.
Remove the driver airbag module.
(Refer to the RT group - "DAB and Clock spring ...
Removal
•
Do not spill brake fluid on the vehicle;
it may damage the paint if brake fluid does contac ...