Hyundai Accent: Removal
| 1. |
Disconnect the negative (-) battery terminal.
|
| 2. |
Remove the steering column upper (A) and lower (B) shrouds after
removing 3 screws.
|
| 3. |
Disconnect the connector. Release the lock of wiper switch using
tool without removing the steering wheel and the clock spring.
Remove the wiper and washer switch.
|
Inspection
Check for continuity between the terminals while operating the wiper and
washer switch. If it is not normal condition, replace wiper and wiper switch.
Wiper Switch
Washer Switch ...
Installation
1.
Install the wiper switch.
2.
Install the steering column upper and lower shrouds.
...
See also:
Side Airbag (SAB) Module. Description
and Operation
Description
The Side Airbags (SAB) are installed inside the front seat and protects
the driver and passenger from danger when side crash occurs. The SRSCM determines
deployment of side airba ...
Replacement
Standard values, such as torques and certain adjustments,
must be strictly observed in the reassembly of all parts.
If removed, the following parts should always be replaced
with new ones ...
Inspection
1.
Turn the ignition switch OFF.
2.
Remove the ECTS (Refer to "Removal").
3.
After immersing the ther ...
Hyundai Accent Manuals
В© 2011-2024 Copyright www.hamanual.com