Hyundai Accent Manuals

Hyundai Accent: Removal - Front Washer Motor. Repair 
procedures - Windshield Wiper/Washer - Body Electrical SystemHyundai Accent: Removal

-
When servicing the washer pump, be careful not to damage the washer pump seal.
-
Do not operate the washer pump before filling the washer reservoir.
Failure to do so could result in premature pump failure.
1.
Disconnect the negative (-) battery terminal.
2.
Remove the front bumper.
(Refer to the BD group - "Front bumper")
3.
Remove the washer hose and disconnect the washer motor connector (A).

4.
Remove the washer reservoir (A) after removing 2 bolts.


Inspection
1. With the washer motor connected to the reservoir tank, fill the reservoir tank with water. ...

Installation
1. Install the washer reservoir. Before installing the pump motor, check the f ...

See also:

Ignition switch position
LOCK The steering wheel locks to protect against theft (if equipped). The ignition key can be removed only in the LOCK position. When turning the ignition switch to the LOCK position, push the k ...

SRS Control Module (SRSCM). Components and Components Location
Components ...

Inspection
1. Turn the ignition switch OFF. 2. Disconnect the PCSV connector. 3. Measure resistance between the PCSV termi ...

Hyundai Accent Manuals


В© 2011-2024 Copyright www.hamanual.com