Hyundai Accent: Removal
| 1. |
Disconnect the negative (-) battery terminal.
|
| 2. |
Remove the driver airbag module.
(Refer to the RT group - "DAB and Clock spring")
|
| 3. |
Remove the steering wheel.
(Refer to the ST group - "Steering column & shaft")
|
| 4. |
Remove 2 screws on the steering wheel.
|
| 5. |
Remove the steering wheel cover (A) after loosening 4 screws.
|
| 6. |
Remove the hands free switch.
|
Inspection
1.
Check the hands free remote control switch for resistance between
No.4 and No.5 terminals in each switch position.
[Audio + Bluetooth Hands Free]
...
Installation
1.
Reassemble the hands free switch after connecting the connector.
2.
Reassemble the steering wheel.
3.
Reasse ...
See also:
Installation
1.
Install the rear combination lamp assembly.
2.
Connect the rear combination lamp assembly connector.
3.
Conn ...
Wheel alignment and tire balance
The wheels on your vehicle were aligned and balanced carefully at the factory
to give you the longest tire life and best overall performance.
In most cases, you will not need to have your wheels al ...
Changing a tire with TPMS
If you have a flat tire, the Low Tire Pressure will come on. Have the flat tire
repaired by an authorized HYUNDAI dealer as soon as possible or replace the flat
tire with the spare tire.
CAUTION ...
Hyundai Accent Manuals
В© 2011-2024 Copyright www.hamanual.com