1. |
Disconnect the negative (-) battery terminal.
|
2. |
Remove the front bumper.
(Refer to the BD group - "Front bumper")
|
3. |
Loosening the head lamp mounting bolts (4EA) and disconnect the
head lamp connector(B). Then, remove the head lamp assembly (A).
|
4. |
Remove the dust cap(A) and disconnect the connector. Then remove
the head lamp (high / low) bulb(B).
|
5. |
Disconnect the connector(A) and remove the turn signal lamp.
|
Anchor Pretensioner (APT). Components and Components Location
Components
...
Removal and Installation
1.
Disconnect the battery terminals. (Refer to Engine
and transaxle assembly in this group)
2.
Remove the air cleaner assembly. (Refer to E ...
Positive Crankcase
Ventilation (PCV) Valve. Description and Operation
Operation Principle
...