Hyundai Accent Manuals

Hyundai Accent: Removal - Oil Pan. Repair procedures - Lubrication System - Engine Mechanical SystemHyundai Accent: Removal

Hyundai Accent RB (2010-2018) Service Manual / Engine Mechanical System / Lubrication System / Oil Pan. Repair procedures / Removal

1.
Remove the under covers (A).
Tightening torque:
6.9 ~ 10.8N.m (0.7 ~ 1.1kgf.m, 5.1 ~ 7.9lb-ft)

2.
Drain engine oil.
3.
Using the SST(09215-3C000) and remove the oil pan.

•
Insert the SST between the oil pan and the ladder frame by tapping it with a plastic hammer in the direction of arrow.
•
After tapping the SST with a plastic hammer along the direction of edge of the oil pan, remove it from the ladder frame. arrow around more than 2/3 edge of the oil pan, remove it from the ladder frame.
•
Do not turn over the SST abruptly without tapping. It be result in damage of the SST.

Oil Pan. Repair procedures
...

Installation
1. Install the oil pan. (1) Using a razor blade and gasket scraper, remove all the old packing material from the gasket surfaces. ...

See also:

Circuit Diagram (2)
...

Special Service Tools
Special Tools Tool (Number and name) Illustration Use 09861-31100 Sealant cut-out tool Cutting windshield sealant ( ...

Input Speed Sensor. Specifications
Specifications ▷ Type: Hall effect sensor Operation condition [°C(°F)] ((-)40 ~ 150)) -40 ~ 302 Air gap(mm)in. (1.2 ~ 1.8) 0.0472 ...

Hyundai Accent Manuals


© 2011-2024 Copyright www.hamanual.com