Hyundai Accent: Removal

Hyundai Accent RB (2010-2018) Service Manual / Engine Control/Fuel System / Engine Control System / Engine Coolant Temperature Sensor (ECTS). Repair procedures / Removal

1.	Turn the ignition switch OFF and disconnect the battery negative (-) cable.

2.	Disconnect the engine coolant temperature sensor connector (A).

3.	Supplement the engine coolant (Refer to “Cooling System” in EM group).

Inspection

1. Turn the ignition switch OFF. 2. Remove the ECTS (Refer to "Removal"). 3. After immersing the ther ...

Installation

• Install the component with the specified torques. • ...

See also:

Repair procedures
Compession Pressure Inspection If the there is lack of power, excessive oil consumption or poor fuel economy, measure the comp ...

Manual climate control system
1. Temperature control knob 2. Fan speed control knob 3. Air conditioning button 4. Air intake control button 5. Mode selection knob ...

Interior D ( 4Door )
Seatbelt height adjust upper mounting hole (Ø15) Seatbelt height adjust lower mounting hole (Ø15) ...

Hyundai Accent Manuals

© 2011-2024 Copyright www.hamanual.com