Hyundai Accent Manuals

Hyundai Accent: Removal - Camshaft Position Sensor 
(CMPS). Repair procedures - Engine Control System - Engine Control/Fuel SystemHyundai Accent: Removal

DON’T remove the camshaft position sensor while the engine is running or right after engine is turned off. The part and engine oil is hot and can cause burns.
[Bank 1 / Intake]
1.
Turn the ignition switch OFF and disconnect the battery negative (-) cable.
2.
Disconnect the camshaft position sensor connector (A).
3.
Remove the installation bolt (B), and then remove the sensor.

[Bank 1 / Exhaust]
1.
Turn the ignition switch OFF and disconnect the battery negative (-) cable.
2.
Disconnect the camshaft position sensor connector (A).
3.
Remove the hanger and the protector.
4.
Remove the installation bolt (B), and then remove the sensor.


Inspection
1. Check the signal waveform of the CMPS and CKPS using the GDS. Specification: Refer to “Wave Form” ...

Installation
• Install the component with the specified torques. • ...

See also:

Installation
1. Connect the cluster connector. 2. Install the cluster assembly. 3. Connect the trip switch connector. ...

Front Body D ( 5Door )
Hood hinge mounting hole (Ø10) Fender apron upper member tooling hole (Ø6.6) Front shock ...

Low tire pressure telltale
When the tire pressure monitoring system warning indicator is illuminated, one or more of your tires is significantly under-inflated. If the telltale illuminates, immediately reduce your speed, a ...

Hyundai Accent Manuals


© 2011-2024 Copyright www.hamanual.com