Hyundai Accent Manuals

Hyundai Accent: Removal - Fuel Tank Pressure Sensor (FTPS). Repair procedures - Engine Control System - Engine Control/Fuel SystemHyundai Accent: Removal

Hyundai Accent RB (2010-2018) Service Manual / Engine Control/Fuel System / Engine Control System / Fuel Tank Pressure Sensor (FTPS). Repair procedures / Removal

1.
Turn the ignition switch OFF and disconnect the battery negative (-) cable.
2.
Remove the rear seat (Refer to "Seat" in BD group).
3.
Remove the fuel pump service cover (A).
4.
Disconnect the fuel tank pressure sensor connector.
5.
Remove the fuel tank pressure sensor (A) after releasing the hooks vertically.

Inspection
1. Connect the GDS on the Data Link Connector (DLC). 2. Measure the output voltage of the FTPS. Specification: ...

Installation
• Install the component with the specified torques. • ...

See also:

Front Body C ( 4Door )
Engine mounting bracket hole (Ø12) Battery tray leg bracket tooling hole (Ø12) Engine m ...

Inspection
Driver Airbag (DAB) If any improper parts are found during the following inspection, replace the airbag module with a new one. ...

Transaxle Number. Automatic
1. Model - NA : A6GF1 2. Production year - B : 2011, C : 2012, D : 2013, E : 2014... 3. Fin ...

Hyundai Accent Manuals


© 2011-2024 Copyright www.hamanual.com