1. |
Turn the ignition switch OFF and disconnect the battery
negative (-) cable.
|
2. |
Disconnect the variable intake solenoid valve connector
(A).
|
3. |
Disconnect the vacuum hoses (B) from the valve.
|
4. |
Remove the installation bolt, and then remove the
valve (C) from the surge tank.
|
Immobilizer Control Unit. Repair
procedures
Replacement
1.
Disconnect the negative (-) battery terminal.
2.
Remove the crash pad lower panel.
(Refer to the BD group - "Crash ...
Interior Trim. Repair procedures
Replacement
Door Scuff Trim Replacement
[Sedan]
•
Put on gloves to protect your ...
Actual Measurement Dimensions ( 4Door )
Front side member tooling hole (Ø6.6)
Side cover mounting hole
(B/B’: Ø6.6/ Ø8.6)
...